1. When plastering the film, please prepare the items on the drawing and stick them to < br /> as far as possible in a less dusty environment.
2. Open the alcohol bag, take out the alcohol cloth and clean the screen of mobile phone < br />.
3. Wipe the screen of mobile phone with dry cleaning cloth and clean up the surface dust < br />.
4. Use electrostatic sticker to stick away the residual dust spots on the screen surface of mobile phone, so as to avoid dust spots < br /> when sticking film.
5. Clean hands and keep them clean before applying film. Spray some water-coagulant < br /> on hands.
6. Remove the condensate film (the middle layer is the condensate film)
7. Viscous side up, spraying water coagulant, spraying whole water coagulation film adhesive surface < br />.
8. Aligning the upper and lower holes (this step needs to be taken slowly, in order to stick to the crooked holes, you can move the alignment holes slightly)
9. One hand holds the membrane and the other hand wraps the cleaning cloth with a scraper and gently scrapes away the coagulant (from inside to outside, avoiding the receiver)
10. Dry the excess coagulant. After the coagulant is dried, press the edge repeatedly with your hand to make the edge more firmly fit the arc surface of the mobile phone edge < br />.
11. Drying water with a blower restores viscidity < br />.
12. After drying, it is normal to throw a small amount of water coagulant or air bubbles, which will disappear automatically within 24 hours < br />.